Hi everybody,
I have problem with my machine. When I turn power on, the screen display System Configure screen as following:
Slot 0: 013F 40
Slot 1:
Slot 2: 013F 4A
and I can do nothing to make the machine run. What does it mean of this screen? and What can I do now?
It has a OPT3 card: what is this card function, and what are those modules on this card for? I see that there is not module on User ROM and System ROM slot. I think some one triped off these modules, is it right?
I dont have any book of this control, and I really need some ...
Thanks
Thread: Help: Fanuc 16MA
Results 1 to 5 of 5
Hybrid View
-
05-21-2006, 04:38 PM #1
Member
- Join Date
- May 2005
- Posts
- 109
Help: Fanuc 16MA
-
05-21-2006, 05:16 PM #2
Community Moderator
- Join Date
- Dec 2003
- Posts
- 24223
Do you know if this is a 16iA? I also have 16B & 16C.
Send me a PM with your email address.
Al.CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
-
05-22-2006, 07:23 PM #3
Member
- Join Date
- Mar 2006
- Posts
- 371
Make sure the EM button is out before you push the "ON" button.
-
05-23-2006, 07:39 AM #4
Member
- Join Date
- May 2005
- Posts
- 109
Hi single phase
The EM button is OK. You mean that the EM button may short inside?
-
05-23-2006, 03:40 PM #5
Member
- Join Date
- Mar 2006
- Posts
- 371
No, I just mean that if the EM button is in when you press the ON button that my Fanuc 16TA will do the same thing as yours is doing. It will stop at that screen and do nothing more. So simply make sure the EM button is out before pressing the ON button.
Reply With Quote
Posting Permissions
