Hello I have a problem, I can not cut the left-hand thread. Radial active tool. Right without problems.
M29 .... ...
G88 ..
What to do with the left?
Many thanks in advance.
Hello I have a problem, I can not cut the left-hand thread. Radial active tool. Right without problems.
M29 .... ...
G88 ..
What to do with the left?
Many thanks in advance.
I find correct codes M72 and M73
But the machine is stops at the G88 and waiting when I press "Start".
And it continues to work after pressing the button.
What's the problem?
T0000
G0 C0 M8
G0 X25 Z-20
G0 X20
M72
M29 S400
G88 X-20 R0 P0 F1
G80
M73
M30 U0 W0
M1
OK,
You need to reverse motor polarity before engaging M29 Rigid Tap function.
Therefore:
M176 (spindle polarity reverse)
M29S400
G88X-20.R)P)F1.
G80
M177(spindle normal)
Thank you DouglasR for help. I understood.
My pleasure.