[dunnitagain]

Ive just purchased a 1993 Fadal 6030 DC with scales and a Numatix control.
Previous owners said control works good, but is very glitchy.
The control uses an obsolete Delta Tau PMAC , and retains the Fadal amps and motors.
I was curious if the KFLOP would be a viable Re-Retrofit for this machine or not?
Any other suggestions? I cant really afford a several thou Upgrade for new drives and motors,
looking to use most of what is here. ( 2 New Drives and 3 Recent Motor Rebuilds Documented )
Thanks in Advance

[TomKerekes]

Hi dunnitagain,

Do you have any information or specs on the interface to the drives or feedback?

Regards

[dunnitagain]

Hi Tom, I can get you specifics when the machine shows up at my door, I appreciate your help . Thanks

[russormrod]

Contact Carlos at MTI controls. He is the owner. He is based near Windsor Canada.


Russ

[dunnitagain]

Been there done that with Carlo, I don't have 5000.00 just for a software upgrade.
Just looking for something more reasonable than antiquated proprietary software that's supposed to be open source.

[russormrod]

I totally understand. We'll chat about it in the near future. Have a great week


Russ