what size stepper would people recommend using on a z axis that has a 40 tooth pulley on stepper a 20 tooth pulley on ball screw the ball screw is 1 start 5mm pitch or one turn = 5 mm of travel, its weight is around 100kg
what size stepper would people recommend using on a z axis that has a 40 tooth pulley on stepper a 20 tooth pulley on ball screw the ball screw is 1 start 5mm pitch or one turn = 5 mm of travel, its weight is around 100kg
http://danielscnc.webs.com/
being disabled is not a hindrance it gives you attitude
[SIGPIC][/SIGPIC]