[MrMiffy08]

Hello everyone at cnc-zones,

I am Hanno from Hamburg, Germany and I'm dreaming of cnc since the last 25 years. Now I am in the situation that I can realise my dream, I'm working at a small cross-table with a stepper and I want to build a kind of 6040 cnc.
Here are lots of discussions about it and I'm sure I find something interesting to show and share with you.

Greets, Hanno

[primerchevy]

Glad to have found this forum! I am currently researching and preparing to build a CNC router to learn more about CNC control and ultimately swap out the router for a plasma cutter once I get it up and running. I also would like to convert my mini lathe to CNC and from there who knows. I have a feeling that if and when I learn the ins and outs of CNC I'll be converting everything! Lol

[hkmark]

Hi, I great to aboard these forums. I am looking for a CNC router kit. Preferably from southern China. Thought this forum would get me started in the right direction with advice for purchase, build and projects.

[JJAM]

Hello, complete newbie to anything CNC. I build one off vintage motorcycle parts for a living and just acquired a Supermax YCM40 3 axis mill with an Allen Bradley 8400MP controller and need some help. I have lurked here before and saw good answers to peoples questions. So here I am.

Jim

[abdelaziz.saber]

Hello Everybody,

I'm Abdelaziz, an electronics engineer, you can call me zizo as a nickname , I'm currently building my first CNC machine

[Shiva Machine]

Hi I am Shiva

[Shiva Machine]

Hi

[xuxuinho]

Hi, I'm xuxuinho

[Michael Rytter]

Happy to find this place! Hope to be able to contribute as much as I know I will benefit!

[RoboBill]

Hello all! looking forward to learning about converting my ENCO mill to CNC and then how to use it!

[yolanda casser]

Hello ,I'm yolanda. S-kype:yolanda11093 .Hope we can make friend

make laser cutting machine


-----------------------------------------------------------------------------------------------


TR5030 (500x300mm) Moving table,rotary attachment,



TR6040(600x400mm) Moving table,rotary attachment,



TR9060(900x600mm),Moving table,rotary clamp,Auto Focus.



TR1390(1300x900mm)Moving table,rotary clamp,Auto Focus.



TR1080(1000x800mm)TR1280(1200x800mm)

[yolanda casser]

I'm yolanda ,make laser cutting machine Glad to know all of us . S-kype:yolanda11093 TR5030 (500x300mm) Moving table,rotary attachment,



TR6040(600x400mm) Moving table,rotary attachment,



TR9060(900x600mm),Moving table,rotary clamp,Auto Focus.



TR1390(1300x900mm)Moving table,rotary clamp,Auto Focus.



TR1080(1000x800mm)TR1280(1200x800mm)

[LaserArts]

I have 60 W, 400x600 mm G-Weike laser engraver.
Great engraver, but not so good cutting 1/8 acrylic, or thick leather.
Question: can I replace the 60 W tube with 100-120 W laser tube and what else is necessary ...?

[kevin909]

Hi Everyone!
I m Kevin, CNC Programmer in Calgary,Alberta CANADA. It is great to be with U here to share knowledge and experiences

[tmoorez06]

Hi, it's good to be here. I'm a software developer and totally new to CNC. I'm trying to design a simple mechanical device and now wish I had a degree in Mechanical Engineering. Anyway, I'm trying to draft my design using TurboCAD 18 Pro Platinum, (I'm still learning how to use the CAD software) an hope to eventually develop something I can take to a local machine shop to fabricate into a working prototype. The further I get into the design, the more questions pop up. I came across this site while researching tolerances. I already found some helpful info here and decided to join. Without access to sites like this, and the help of knowledgeable people on these sites, I wouldn't be as far along on my design as I am. Thank you, Travis

[Ricardo E]

I´m Mexican, I´m student and I¨m interested in this web page...I want to learn

[AW11PHD]

Hi Everybody,
I am Joey from North Dakota, USA. I am a draftsman and plasma operator for our company and I am currently troubleshooting our system. Trying to find answers to get arcs to cut like they used to when our machine was new 6 years ago! The quality of our system is being compromised and it is extremely frustrating. Glad there are communities like this to help out!

what have you all done to find the source of the problem

[Chale4incolo]

Hello all,
I'm Charley in Front Range of Colorado, USA. I'm an IR laser R&D guy for many years, and also a fairly involved home manual machinist (fine old Hardinge toolroom lathe, J-head B'port, B&S surface grinder, etc.). Fleeting interest in CNC that I oughta get more serious about one of these days. Currently thinking about single-point diamond turning a little, like as in potentially ginning up a home-built capability--! It's a thought anyhow (I do at least have many yrs of precision optomechanics design background, so maybe not <entirely> crazy...). Looking forward to poking around here a little, thanks.

[andalus]

Hola buenas tardes . me presento soy español recien jubilado de la carpinteria.y para pasar el tiempo libre que tengo me estoy construyendo una fresadora cnc .no entiendo nada de electronica y me interesaria conectar con alguien que pudiese darme alguna informacion sobre ese tema.muchas gracias a toda la comunidad por aceptarme aqui y cordiales saludos desde España

[Gerardo Sanchez]

Hola a todos, mi nombre es Gerardo Sanchez y estoy empezando un negocio de corte y grabado láser, espero poder compartir con ustedes conocimientos que nos ayuden a crecer como personas y como emprendedores.
Estoy a sus órdenes.
Saludos

Hello Everyone, Mi name is Gerardo Sanchez, I'm starting a new local businness giving service of cut and engraving with laser. I hope to have a chance to share knowledge to help us to grow as people & entepreneurs.
Best regards, Sorry if my english it´s not very good.