[valkokir]

Hi, I'm Kirk.
I run Pro/E/ Creo with Pro manufacture running 2 Techno routers and one large custom built CNC.
For work I cut samples of my packaging and component parts from Expanded foam, both Expanded Polypropylene (commonly seen in automotive applications) and Expanded polystyrene(commonly seen in packaging)
I'm currently using the machine to start to learn CNC for Aluminum milling which is much less forgiving than foam.

[Altaf]

Hi,
I would like to join cnczone due to I am interesting hobbits in electronic circuits and play with electronic circuit

[crtroyer]

Greetings,
I am a toolmaker/machinist/programmer, currently working on a Lagunmatic 310 retrofit.
Love the site for the depth and breadth of practical experience available.

[ElMosto]

hello all,
i have a laser machine equiped with RDC6332G system, but i have a problem wich is :
when i put a designe into the machine and i lunch the machine, the laser dont blow.
thank you & i wich that you replay quick ^^

[Krutas]

Hello im a hobist, but i work in a furniture factory and i want to make my own cnc. For some time i thinking about learnig to use Wekee BP15 Optimat commercial cnc for cutting my parts. if anyone know how to use it pm ☺

[pkmerwin]

Hello all,
Danco Anodizing is a leading metal finishing company in southern California. we service many markets including medical, aerospace, automotive and commercial. Danco offers a wide variety of services including anodizing of aluminum and titanium, mechanical finishing polishing deburring brush finishing, laser marking and many more. looking forward to sharing on the forum.

[MartinRangel]

Hi all,
I'm a CNC Specialist, 20 years experience, currently using SURFCAM2014 and SOLIDWORKS 2014, I'm at Phx Az, working for a company leader in aluminum products for automotive, solar and many more.

[AristatosDesign]

Hey everyone,

Hope you are having a great day. I am an all around computer nerd and hobby inventor. I run my own computer tech support company, and I am
currently working on a design for a thread-less ball-screw based CNC. Going to run it from a Udoo Quad, and hopefully it will turn out well.

Thanks

[orboriack]

Hello! Just a ordinary guy working with my plasma and router machine as a side job.

[-mal-]

Hey, I hope all is good and well. I'm an entry level maintenance fitter and seem to always have little jobs on the go in the garage.

[omg]

I have a company turning milling sector

[mrveenie]

already reading a lot in the last few years,
But now looking for more information on co2 laser cutters. want to buy one.

[Ross-mtv]

Hello,
28 year old from the southern coast of England, just bought my first machine; a Miyano MTV-350. Been in engineering since doing an apprenticeship in injection mould tool making and now work as a designer in motorsports. Bought the Miyano to do some bits on the side, maybe start a small company etc. Got a couple of questions to post about the machine which I'll do this evening. The first thing I have learned is never buy a 2.2 ton box without having somewhere lined up to put it.

Ross

[legalmachinist]

Hello,
I am a semi-retired General Counsel for a biotech company and started machinery as a new hobby in the last three years. Currently I am building a microprocessor controlled dividing head for fun and that project has led me to this site. I look forward to learning more about CNC related aspects with the goal of someday converting my small Grizzly mill as well - but for now, one axis at a time while I learn Arduino coding.
M

[DisasterArea]

Hi, guys! I run a small manufacturing company in Garner, NC (near Raleigh.) We're using a Tormach PCNC 770 to machine cast aluminum electronic enclosures. Looking forward to learning the difference between my butt and a hole in the ground.

[JoseRizzi]

Hello guys, I studied electronic long time ago but I allways worked with mechanic equipaments and electrical maintence. So, last year I decided to construct my own cnc plasma cutting using mach3. I bought 4 servo-motor from Hiwin to star. Only this year I bought the HY-Jk02-M 5 axis interface board but I couldn´t work with it up to now. I started to look for something about this and google led me to this forum. I personally felt happy when I realized the possibility to learn more and more about cnc comands and follow a forum just like this. I hope can help others in the near feature with my experiences.

[BLUFLY]

Hi All

I am a retired C.N.C. programmer in Western Australia. My experience is mostly on vertical mills with Fanuc control. Our company machined hydraulic valve manifolds with special tooling and manual programming.

I used to know G-code backwards, but I am a bit rusty now. It will come back with a bit of practice.
I know enough about electronics to get into trouble, but not enough to get out.

I purchased a X6-1500GT-USB carving machine from China a couple of months ago and I am working away on a few issues. I will post more information on another thread shortly.

Lloyd

[m1001]

Hi all
I've recently purchased a Ex cnc Bridgeport mill and a warco lathe, I've been a welder/fabricator all my life, now wishing to get more involved in engineering/machining, hope I can get some help with reinstating the old brigeport back to cnc
regards all

[tanvon]

CNC Jobs, Job Search, CNC Employment | CNC Jobs City
CNC Job search. All new cnc operator machinists programming jobs in one place. Find your next dream job.
All CNC Jobs

- - - Updated - - -

http://cncjobscity.com/
CNC Job search. All new cnc operator machinists programming jobs in one place. Find your next dream job.
All CNC Jobs

[Bahrain_M]

Good afternoon,
I need help with NC studio, i have designs on PDF files that I want to convert to NC studio. Can anyone here help or maybe recommend someone i can work with?
Many thanks