[Camaro68]

Think someone can help me out and make this into a dxf file for me.

[metalworkz]

Think someone can help me out and make this into a dxf file for me.

Camero,
Here you go;

[Camaro68]

Thanx alot, that's great. I wish I could do it myself and not have to bother you. How do you do that so nice?

[metalworkz]

Hello,
I'm sorry I didn't realize you had replied already. I imported your picture file into VcarvePro and then traced it with the tracing utility that is included in VcarvePro. I did not do much clean up editing with the file after the trace, but I did delete some of the misc. garbage vectors that were not needed from the trace and then used node editing to cut, trim and reconnect some of the vectors. If you are ever in the market for some great software to manipulate vectors or create parts you can cut you should check into Vectric Software's selection of programs.

[ghostlx]

To anyone interested really...

July updates are now online at http://cnc4free.org. Had hoped to get these online by end of last week but have been run off my feet with work etc...

As usual, some examples below..

TTFN

Danny

awesome as usual Danny
thanks
ghostlx

[Camaro68]

Well for the price of the program I guess I will have to bother ppl on here for now to make dxf files for me. Just abit on the pricey side for just playing around for the guys I do this stuff for.

[Camaro68]

I know I'm starting to be a pain, but what about one last file for now.

[metalworkz]

I know I'm starting to be a pain, but what about one last file for now.

Here is the super bee .dxf. What are you using for CAM software to cut these items??

[Camaro68]

I use Virtual Gibbs, I work at a machine shop as a programmer/machinist.

[ssderick]

Anybody have a state of Texas for plasma?

[metalworkz]

Anybody have a state of Texas for plasma?

How big did you want it, or can you scale it to size after-wards? Here is a small .dxf, let me know if you need a different size.

[jalessi]

Ssderick,

Hope this works well for your project.

Jeff...

[Switcher]

Another Texas dxf file,

You guys are just to fast, lol.

[ssderick]

thanks, it seems to scale fine to 28". what i am really looking for is a very detailed borders
thanks for the help

[Switcher]

Texas detailed dxf.

[ssderick]

thanks switcher exactly what I wanted, I'm going to delete the barrier island an see how it cuts at 30 inches tall any suggestions


DS

[Switcher]

thanks switcher exactly what I wanted, I'm going to delete the barrier island an see how it cuts at 30 inches tall any suggestions


DS

The file should cut fine, just might take a little longer with all the detail.

Post a pic. when you finish.

[yohudi]

awesome as usual Danny
thanks
ghostlx

Hi There,

Many thanks for your kind words.. I hope the files are of use in your CNC projects..

All the best

Danny

[Shane1234]

thanks for all the dxf's guys. i used the mother's day 3d flower and the 3d face. Hoping someone might have a 3d hand to use on the 4th axis rotary...

[jalessi]

Shane,

How about a big hand,

Jeff...