[LaserGod]

Larry, i have watched the videos on how to convert in ink scape. Also i have done many of his projects successfully on my own this way. to which i owe you guys credit for informing me about inkscape. i only post the ones i have issues getting to convert good / at all in some cases. I am not sure if they are too complex for inkscape and i need to try another software? If so please let me know which one i should shoot for.

Thanks Adam

[Larry83301]

Larry, i have watched the videos on how to convert in ink scape. Also i have done many of his projects successfully on my own this way. to which i owe you guys credit for informing me about inkscape. i only post the ones i have issues getting to convert good / at all in some cases. I am not sure if they are too complex for inkscape and i need to try another software? If so please let me know which one i should shoot for.

Thanks Adam

I don't think the problem you are having has anything to do with Inkscape, it's more along the lines of trying to work with a picture that does not have a high enough resolution to define the edges of the different parts. You may need to draw over the parts of the picture that you are having problems with or even redraw the whole thing. I have had to do that even with high resolution pics where the shades of colors are to close for a program to tell where the edge of the part is. I try using several different programs before I attempt to draw over a pic because drawing over them takes time and patience. That's why when someone posts a pic that they want converted there is not always an immediate response.
Here is an example of what I am talking about. check out the left wing and the underside of the body. We can see the edge of the plane but most computer programs can not.



Larry

[u2tree]

i've got this image and i just can't get it very clean, I think it's a crappy image.
Can someone else take a look and see if they can make a dxf out of this cleaner than i can...Attachment 253112

I found it in the Dragons Font on Dafont.com -- Dragons TFB Font | dafont.com
it's letter Z

thanks all...

[danialsan]

This is a DXF made from the font at a little over 4" high. I don't think they were drawn to be blown up larger.

Dan

[jalessi]

U2tree,

I agree the image is crappy.

Maybe this will help,



Jeff...

i've got this image and i just can't get it very clean, I think it's a crappy image.
Can someone else take a look and see if they can make a dxf out of this cleaner than i can...Attachment 253112

I found it in the Dragons Font on Dafont.com -- Dragons TFB Font | dafont.com
it's letter Z

thanks all...

[Larry83301]

U2tree,

I agree the image is crappy.

Maybe this will help,



Jeff...

Jeff that is great. You redrew the whole file didn't you! Nice job! :wave: :wave: :wave:


Larry

[u2tree]

Jeff, that really is fantastic work. You just saved me hours of work, and created one happy co-worker of mine. He's going to make this from 1" stainless, polish it and make it be the support piece that holds up his breakfast bar in his kitchen. When I get pics I'll post them along, but I have a feeling he's a bit away from finishing this project.
Again, Thank You!
Great work

U2tree

[nolifetileathr]

Can Anyone post some .dxf or .dwg files of snowflakes?

[Larry83301]

Can Anyone post some .dxf or .dwg files of snowflakes?

Did you try using the SEARCH THREAD function in the right top of this thread, not the one at the very top of the page??? I found seven posts that have snowflakes in them, one has several and that was just one try, other terms could find even more. Sometimes what you are looking for is already here if you take the time and look for it!


Larry

[Hedda]

Hello!

Cn someone please help me to convert this pictures to DXF files?

Attachment 253252

[Larry83301]

Hello!

Cn someone please help me to convert this pictures to DXF files?

Attachment 253252

If you would search this thread using the search function for this tread you will find several posts. Or you could go to Brands of the World and download the logo for yourself. Just my 2 cents FWIW.
A couple of links to get you started! :stickpoke :stickpoke

Search | Brands of the World?

Search | Brands of the World?

Larry

[kalmetal]

Attachment 194522

i need dxf file plz

[kalmetal]

Attachment 253444Attachment 253442
HI HAYS IT IS BBQ MADE IN LITHUANIA UAB KALMETAL
SITE Kalmetal-kalvyst?s gaminiai

[J. Marti]

My new boss in into harness racing. Anybody have a dxf of a trotter with cart?

[Larry83301]

My new boss in into harness racing. Anybody have a dxf of a trotter with cart?

Not sure what you are looking for but perhaps these links will help. Most of these are easy to convert to a DXF and you will have just what you want.

http://www.supercoloring.com/wp-cont...oring-page.gif

Colour In Page - Bendigo Harness Racing

Horses Embroidery Design: HARNESS RACING OUTLINE from Great Notions


This is how I found the links!
https://www.google.com/search?safe=o...rness%20racing




Larry

[J. Marti]

Larry

Thanks for the response.

It is a great start.

Jon

[Trell]

Has anyone got a 3D or 2D file of this old man on a walking stick

[jalessi]

Trell,

The image you posted looks like Bruce Walkers work, there are undercuts that would require at least a five axis machine.

Carvatures-Relief Wood Carvings.

Jeff...

[jalessi]

Awesome Design & Fabrication!

Attachment 253444Attachment 253442
HI HAYS IT IS BBQ MADE IN LITHUANIA UAB KALMETAL
SITE Kalmetal-kalvyst?s gaminiai

[Trell]

Got a 5 Axis at work and a 3 axis at home so it should not be an issue, but some one could cut it on a 3 Axis and then hand cut the rest. Just wanted something close to go by, doesn't have to be the same.
Thanks for the Help