Need 30 brackets plasma cut, I've made a basic DFX of the part and attatched it. These will be .250" thick 1018 cold roll. I haven't made the final .DFX of the part but this is basically it. I will supply the metal, I just need the machine labor. Give me an idea how much you will charge for 30. If everything turns out okay, good opportunity for many more different brackets I need made up.
Thread: RFQ CNC Plasma work needed
Results 1 to 9 of 9
-
02-23-2006, 02:28 AM #1
Registered
- Join Date
- Apr 2005
- Posts
- 62
RFQ CNC Plasma work needed
-
02-23-2006, 07:18 AM #2
Registered
- Join Date
- Aug 2005
- Posts
- 197
does it have to plasma cut?
How about waterjet cut no haz to deal with.
John
-
02-23-2006, 03:02 PM #3
Registered
- Join Date
- Apr 2005
- Posts
- 80
Sent you a private message. Thanks.
Rick
-
02-23-2006, 03:07 PM #4
Registered
- Join Date
- Apr 2005
- Posts
- 62
You can go ahead and quote me for a waterjet if you'd like. If its cost effective I wouldn't mind the better quality.
-
02-23-2006, 08:06 PM #5
Registered
- Join Date
- Aug 2005
- Posts
- 197
sent PM
John
-
02-26-2006, 03:07 AM #6
Registered
- Join Date
- Apr 2005
- Posts
- 62
Anyone else able to produce these using a waterjet or plasma?
-
02-28-2006, 05:04 PM #7
Registered
- Join Date
- Oct 2005
- Posts
- 859
Will get quote back asap.
Tim
-
03-01-2006, 06:47 PM #8
Registered
- Join Date
- Feb 2006
- Posts
- 36
You have a PM.
George
-
03-08-2006, 03:18 AM #9
Registered
- Join Date
- Jun 2005
- Posts
- 9
Need to know what tolerances and finish you want. makes a difference in the price..plasma creates a kerf (slight angle on the edge)..Can you accept that?
Also , it may be cheaper to have the material supplied. why pay to ship it , unless you get someone local to you..
Dave
Reply With Quote
Posting Permissions
