[M.RISHIKESH]

Dear Sirs

We have got Phoenix Gleason 500HC CNC Hypoid cutting Machine No. 899401 with GE Fanuc Series 150M

Machine is presently running alright

We need to have clone of harddisk of the machine

Please find below details of Harddisk :

Harddisk on our controller is a 50 Pin- SCSI HDD drive of capacity 45MB
There r 50 pins on the HDD that means 25 pins in each row (SCASI drive)

On Yellow cover there is white sticker, HDD UNIT Type A08B - 0047 - C011, NO. N0390 1995 02 )

Please find below details of Hard disk as per the Sticker on it :

MODEL M2611SA

P/N (Part No.) B03B - 7065 - B111A#LP

FUJITSU LIMITED MADE IN JAPAN

SER. NO. 575635 DATE 1994-10

RATING +12VDC 2.0A , + 5VDC 1.0A

There is white round sticker, marked at the bottom of it as Label G & a rectangular sticker marked as Label H

This Hard disk has a 4 pin power connector and 50 pin data cable (25 X 2rows)

We are unable to get compatible Harddisk from OEM

Kindly advice on how to have clone of this Harddisk also if anyone is aware about a compatible Harddisk

Best Regards,

M. Rishikesh

[memoryman]

please give the exact control type (eg 15Mb, 16MA, 16MB, 16MC) with the connection type (hdd built into OPTION unit?)

[fordav11]

its just a common SCSI-2 HDD.
plug it into a PC that is SCSI-capable and clone it to an image file using any PC HDD cloning software such as Norton Ghost.
once you have the image of the drive, power off and unplug it then connect any other brand/model SCSI-2 HDD of a similar size or larger and copy the image to it using the cloning software.