Changing the oil on our headstock... Machine is new to us. Manual clearly states the capacity at 50 liters. We drained about 12 liters from her. I filled with 20 liters. When power is off and oil pump is not running the oil level is clearly off the sight glass full. When the pump is running the oil level is pulled down some and shows about 90% full on the sight glass. Any chance someone has a TL-5 and can confirm for me how much oil they are using? Thanks
Results 1 to 2 of 2
-
04-11-2013, 03:04 PM #1
Registered
- Join Date
- Apr 2004
- Posts
- 353
1979 Mori TL-5 Headstock oil capacity question
-
06-15-2013, 11:04 AM #2
Registered
- Join Date
- Nov 2011
- Posts
- 19
Beyond Engineering in Seven Hills NSW Australia have one. That machine is an 8 station, single direction turret with three meter bed right?
I don't work there anymore.
Reply With QuoteSimilar Threads
-
Aquired a Mori SL1 1979 year Machine, trying to do DNC, has hookups, PHOTOS INSIDE
By blakemachine in forum Mori Seiki lathesReplies: 3Last Post: 03-10-2011, 08:22 PM -
1979 Hurco Basics
By schmold in forum HURCOReplies: 4Last Post: 12-02-2010, 10:05 AM -
Material ID/Capacity Question
By TravisR100 in forum Mechanical Calculations/Engineering DesignReplies: 3Last Post: 04-02-2010, 09:33 AM -
Dumb Question Regarding Machine Capacity
By Eric MFG in forum Knee Vertical MillsReplies: 2Last Post: 11-11-2009, 07:55 PM -
Quick Taig headstock question:
By fretsman in forum Taig Mills / LathesReplies: 4Last Post: 02-08-2008, 09:42 PM
Posting Permissions
