[Dane Lindon]

Here is the dilemma, I have 2 Fanuc machines with the offset page set to Diameter. They need to be in Radius.
Offset.pdf

Techs on both machines stated that it is 5004 that sets the page.

Doosan DNM650 i-series 5004.1=0, 5004.2=0 Offset page is set Radius
Doosan HP5100 18i-MB 5004.1=0, 5004.2=0 Offset page is set Radius
Doosan VC5100 i-series 5004.1=0, 5004.2=0 Offset page is set Diameter
Hardinge XP3APC 18i-MB 5004.1=0, 5004.2=0 Offset page is set Radius
Hardinge GX480APC Oi-MD 5004.1=0, 5004.2=0 Offset page is set Diameter

I don't think it is 5004.
How do I change Fanuc Oi-MD Offset Screen display to Radius?

[viking73]

First, make sure your parameters are backed up. Then check the parameter manual for each machine, they may be different.