586,403 active members*
2,171 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Fanuc > Wasino VMC-18 Fanuc 6m, optional stop

Thread: Wasino VMC-18 Fanuc 6m, optional stop

Results 1 to 4 of 4
  1. 01-23-2013, 07:09 PM #1
    GTMondock
    GTMondock is offline Member
    Join Date
    Jan 2013
    Posts
    37

    Wasino VMC-18 Fanuc 6m, optional stop

    Program will not stop with M01 ( with button in ) or M00 in middle of program.... This all occurred after I have a guy come to fix the machine, turns out it was the cycle start button. He swapped out the cycle start button with the working spindle stop button... So now cycle start works but no program stop or optional stop works.... Has anyone heard of this or are these problems or problem irrelevant ??
    Any help would be greatly appreciated !!!!
    Thanks
    Reply With Quote Reply With Quote
  2. 01-23-2013, 07:14 PM #2
    Al_The_Man's Avatar
    Al_The_Man
    Al_The_Man is offline Community Moderator
    Join Date
    Dec 2003
    Posts
    24223
    Look in the diagnostic screen and see if one of the bits change when pushing the optional stop PB.
    Al.
    CNC, Mechatronics Integration and Custom Machine Design

    “Logic will get you from A to B. Imagination will take you everywhere.”
    Albert E.
    Reply With Quote Reply With Quote
  3. 01-23-2013, 07:23 PM #3
    GTMondock
    GTMondock is offline Member
    Join Date
    Jan 2013
    Posts
    37
    Thanks for the response !
    Yes diagnostic 37 bit 6 changed to a 1 when pressing button.
    Reply With Quote Reply With Quote
  4. 01-23-2013, 08:38 PM #4
    MetalZilla
    MetalZilla is offline Registered
    Join Date
    Jan 2007
    Posts
    243
    Call the guy who "fixed" it to come back and "fix" what he screwed up.
    www.WebMachinist.Net
    The Ultimate Online Source for Machinist Related Stuff!
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. M01 Optional Stop not working
    By erd39030 in forum Fanuc
    Replies: 15
    Last Post: 02-03-2019, 06:56 PM
  2. NV5000 optional stop does not work
    By teal854t in forum Mori Seiki Mills
    Replies: 15
    Last Post: 05-27-2012, 05:19 AM
  3. How to activate the optional stop
    By dingo0722 in forum Haas Mills
    Replies: 4
    Last Post: 01-25-2011, 04:16 PM
  4. Fanuc 6T controll, no Optional stop (M01) Way to install?
    By blakemachine in forum Fanuc
    Replies: 2
    Last Post: 12-15-2009, 07:09 PM
  5. Mo1 Optional Stop
    By a1moldmaker in forum Fadal
    Replies: 18
    Last Post: 04-09-2007, 03:08 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules