586,637 active members*
2,905 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking > MetalWork Discussion > peck drilling on a lathe funuc

Thread: peck drilling on a lathe funuc

Results 1 to 2 of 2
  1. 01-04-2013, 07:17 AM #1
    redridertwo
    redridertwo is offline Registered
    Join Date
    Aug 2011
    Posts
    77

    peck drilling on a lathe funuc

    I have to peck drill on our lathe think it has a funuc 21
    drilling 13in deep useig two drills one gose about 4in deep then the next one the 13in
    using a g100 can cycle
    can get it to rapid in the 4in on the second drill and don't want to wast time re pecking the 4in
    I have 500 parts to do
    any thoughts will a g76 cycle work?
    Reply With Quote Reply With Quote
  2. 01-04-2013, 01:19 PM #2
    txcncman
    txcncman is offline Gold Member
    Send a message via Yahoo to txcncman
    Join Date
    May 2004
    Posts
    4519
    There are multiple threads here on CNCZone dealing with macros for peck drilling. I suggest you look them up.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. G74 peck drilling
    By hackmeister in forum G-Code Programing
    Replies: 10
    Last Post: 07-26-2018, 09:29 PM
  2. peck drilling?
    By Tristar500 in forum BobCad-Cam
    Replies: 1
    Last Post: 01-20-2010, 08:25 PM
  3. Peck drilling on a 16/18i?
    By TheMoose in forum Fanuc
    Replies: 24
    Last Post: 09-09-2008, 09:34 PM
  4. v22 peck drilling
    By 68sixspeed in forum BobCad-Cam
    Replies: 7
    Last Post: 04-03-2008, 10:17 PM
  5. Peck drilling
    By LarryMiran in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 1
    Last Post: 10-23-2004, 11:12 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules