What methods are used to add an external FEED OVERIDE POT?
Needs to be on the machine and not just a screen control.
One for spindle speed would be nice too, to fine tune cutting, without using a mouse.
What methods are used to add an external FEED OVERIDE POT?
Needs to be on the machine and not just a screen control.
One for spindle speed would be nice too, to fine tune cutting, without using a mouse.
Super X3. 3600rpm. Sheridan 6"x24" Lathe + more. Three ways to fix things: The right way, the other way, and maybe your way, which is possibly a faster wrong way.
You need a device that provides analog inputs into Mach3, and a macro or brain to control the FRO.
You can do it with a Pokeys, a PLC, or a plain old Gameport.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)