We made some video for C02 40W laser machines ( Installation, Startup)
pls check here
http://www.automationtechnologiesinc...aser-engraving
CO2 Laser Machines. Automation Technology Inc
We made some video for C02 40W laser machines ( Installation, Startup)
pls check here
http://www.automationtechnologiesinc...aser-engraving
CO2 Laser Machines. Automation Technology Inc
Great! Like it.
Lucy (Jinan Consure Electronic Technology Co.,Ltd) 0086-18254116182
Web:http://www.jncslaser.com Email: [email protected] Skype:consurelaser
I routinely cut 1/8" plywood and and have cut 1/4" plywood. There are times when it will not cut all the way through, but this is due to places in the wood that may be harder or have more adhesive used in the bonding process.
Milt
In the video, showing to use tap water might not be really good idea.
If you are speaking of using tap water for the cooling of the tube, it is not a good idea. I keep a supply of distilled water on hand and use it exclusively. I also change the water when I feel it has been in the reservoir long enough to become contaminated. At this time, I use ice packs (refreezable type) to keep the water at about 65 degrees F. (Maybe about 17 or 18 degrees C)? I have purchasd a radiator and am planning on running the cooling water through the radiator that will be attached to the output of the window air conditioner in my shed.
Milt