I wanted a Lead Out of 0.00 which shoud be fine.
Bobcad doesn't see it as a Lead Out of 0.00 it
see it as NO LEAD OUT. Which in turn doesn't turn of the gas
and cuts a line in the part and turns it to scrap.
This is an ERROR or there should be a NOTE: Lead Out of 0.00
will etc...
Later JeReMy
Results 1 to 3 of 3
-
05-10-2012, 03:37 PM #1
Registered
- Join Date
- Dec 2005
- Posts
- 19
Burn Table Lead Out of Zero ERROR
-
05-10-2012, 04:53 PM #2
Member
- Join Date
- Mar 2012
- Posts
- 1570
Post Settings
JINDA,
What post are you using? I get a "m code " for off and on if I use a lead in / out or just a lead in...
Can you post a sample file and or your post processor?
AlAl DePoalo
Partner Product Manager BobCAD CAM, Inc. 866-408-3226 X147
-
05-10-2012, 06:33 PM #3
Registered
- Join Date
- Dec 2005
- Posts
- 19
Thanks Got it.
The error is in the post
Later JeReMy
Reply With QuoteSimilar Threads
-
203 lead screw error .007" work shift
By duckslayer in forum Haas MillsReplies: 2Last Post: 01-10-2012, 03:56 AM -
lead screw diameter for 6 ft table
By tkms002 in forum DIY CNC Router Table MachinesReplies: 10Last Post: 03-27-2011, 07:19 AM -
Lead error?
By Schwabie in forum Bridgeport / Hardinge MillsReplies: 4Last Post: 10-15-2008, 02:05 PM -
Roton Ballscrew Lead error figures?
By davo727 in forum Linear and Rotary MotionReplies: 5Last Post: 03-17-2007, 11:19 PM -
Compensating for ball screw lead error?
By Noah in forum Uncategorised MetalWorking MachinesReplies: 2Last Post: 08-13-2004, 02:51 AM
Posting Permissions
