Hey, so my school recently bought a plasma table and we have yet to cut to scale. it seams that whatever we design on MasterCam X6 comes out some percentage bigger than what we design. we are trying to figure out if its in the machine or in the gcode, but if anyone uses that table with MasterCam X6 could give us the post that they use and works that would be perfect. thanks for looking!
Results 1 to 2 of 2
-
05-09-2012, 06:43 PM #1
Registered
- Join Date
- May 2012
- Posts
- 0
Mastercam X6 Post for Techno CNC plasma cutter
-
05-10-2012, 02:44 PM #2
Community Moderator
- Join Date
- Apr 2003
- Posts
- 3578
Contact the Educational division of Mastercam in Gig harbor they have posts for the schools.
you may want to start with the local educational mastercam dealer first.(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Cadcam
Software and hardware sales, contract Programming and Consultant , Cad-Cam Instructor .
Reply With QuoteSimilar Threads
-
CNC Laser cutter versus CNC Plasma cutter?
By squale in forum Laser Engraving / Cutting Machine General TopicsReplies: 14Last Post: 12-24-2020, 02:14 AM -
Need to Techno CNC Alphacam post.
By ramerturk in forum Techno CNCReplies: 3Last Post: 03-26-2012, 08:00 PM -
CNC Plasma Cutter, Laser Cutter, Water Jet
By antsals in forum Waterjet General TopicsReplies: 6Last Post: 03-11-2011, 01:56 PM -
Looking for v9.1 Mastercam post for Mach Plasma
By harry320 in forum Post Processors for MCReplies: 1Last Post: 01-18-2008, 01:55 AM
Posting Permissions
