hi all,
I look for a schema for a driverboard whit a SLA7026 .
thanks in advance
Bob
holland
hi all,
I look for a schema for a driverboard whit a SLA7026 .
thanks in advance
Bob
holland
Hello Bob.Originally Posted by B.v.d.Holst
I did not came across a complete application with the SLA7026, but I know someone who used this bridge behind a L297. So I will ask him if he has the shematics available. If you do need microstepping then a microcontroller is needed I think. I hope someone will come up with a nice appl. with a uP.
So if halfstep is enough, PM me for furher contact. ( I am Dutch too ).
AbSat.
Hello AbSat,
I like to get more about the schematic form the person you no and mybe you can mail my in Dutch ([email protected] ) my English is very bad
Best Regards
Bob
I also need a Schematic for SLA7026 since SLA7062is hard to get.
Isaak I have no respons to my mail form Absat in about 2005, so I can reply this. My English is very bad to respons
@Isaak.
I build a driver for a friend who salvaged a pcb with 3 SLA7026 drivers but no translator.
I put 3 times a L297 on a board to be controlled from a printer port by Mach 3 or Turbo CNC and connected that to the salvaged pcb.
As far as I know he got a router running with it.
If you send me a private message with your email address I can mail you the schematics I used.
Absat.
Hello AbSat
I downloaded SLA7026 Datasheet, and it has very specific details on how to use it, now i am going to try it on a single Axis Stepper Driver i am building for a Transformer Winding Machine for Wire guide, I am using a Pic 16f873 to control it. So i am going to try it out first. Thank you
Hello AbSat,
Wil you sendt my also the schematic for the Sla 7026 that I ask on 12-01-2005. I have it never reciev in my mail.
B.v.d.Holst
< [email protected]. >
Hello Isaak.
I think you made a good choice. Specialy when your control is not done by a CNC programm a uP is more flexible.
Succes. AbSat.
@bob.
I will mail you in Dutch.
But we had email contact till 05-03-2006 and we exchanged several schematics and pcb layouts.
AbSat.
Hello Absat,
I am sorry whit my comment about Absat, hi replay derectly to my mail and give good help to my problem. In 2006 I have to go on a new PC and los al my data ( no back-up system) and go to the CNC.NL ( Dutch) so I los the connection you and my.
HI ALL PLEASE i want schematic please