Well, I decided to re-make the mounting for the rails on my CNC machine - so I can finally finish building the darn thing!
Interested in seeing what it might cost to have them made for me. Looking for a decent turn-around time (Shipping via FedEx should be included in the Quote) also.
Information:
- Quantity: 4
- Block is 1.50" x 2.00" x .50" Thick
- Material: Aluminum (6061 is fine)
- Shipped (FedEx Ground): Zip-Code 14221, New York.
- Tolerance: +/- .005" (reasonable, right?), +/- .001" on Center Bore.
- All Measurments on Drawings are in Inches
- Please Email Quotes to: JavaMoose AT Gmail DOT Com
Here is the part:
- IGES Format
- DWG (Export from Inventor)
- Inventor IPT
- Technical Drawing:
- Click for Larger-View -
- Pretty Render:
No, you don't need to polish it.
Results 1 to 7 of 7
-
11-17-2005, 12:55 AM #1
Registered
- Join Date
- Mar 2004
- Posts
- 847
RFQ - Simple Aluminum Work, Fast Turn-Around. - AWARDED -
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Check Out My Build-Log: http://www.cnczone.com/forums/showthread.php?t=6452
-
11-17-2005, 03:29 AM #2
Registered
- Join Date
- Jul 2005
- Posts
- 236
block
How thick is it? It looks to be 1 inch. e-mail me at [email protected] and I will send a quote. Larry
-
11-17-2005, 06:05 AM #3
Registered
- Join Date
- Apr 2005
- Posts
- 421
JavaDog clear you mailbox, dude!
-
11-17-2005, 06:29 AM #4
Registered
- Join Date
- Dec 2003
- Posts
- 768
You've got mail Javamoose!
Dieguy, how is your retrofit going? I guess good if you're bidding on this job
Proud owner of a Series II Bridgeport.
-
11-17-2005, 08:28 AM #5
Registered
- Join Date
- Apr 2005
- Posts
- 421
Actually put on hold until the new building is up, I don't want to string and fling the 220 more than once, I will do this on my "little" mill.
Originally Posted by Cold Fusion
You've got mail Javamoose!
Dieguy, how is your retrofit going? I guess good if you're bidding on this job
-
11-17-2005, 02:56 PM #6
Registered
- Join Date
- Mar 2004
- Posts
- 847
Heh, sorry - fills up quick! Originally Posted by DieGuy
JavaDog clear you mailbox, dude!
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Check Out My Build-Log: http://www.cnczone.com/forums/showthread.php?t=6452
-
11-17-2005, 09:25 PM #7
Registered
- Join Date
- Mar 2004
- Posts
- 847
Job has been awarded.
Thanks to everyone that responded!(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Check Out My Build-Log: http://www.cnczone.com/forums/showthread.php?t=6452
Reply With Quote
Posting Permissions
