After getting fed up with the amount of coolant that was constantly raining out of the large opening in the top of my VF-3 I decided to make a custom top cover / splash guard. My VF-3 is a 2000, not sure if the newer machines have the same opening in the top or not. I would be happy to send the .dxf to anyone who has a similar year machine and want's to make one. Send me a message here if you want it.
J
Results 1 to 2 of 2
-
02-24-2012, 03:47 AM #1
Registered
- Join Date
- Feb 2009
- Posts
- 40
Custom top cover / splash guard for VF-3
-
02-25-2012, 02:34 AM #2
Registered
- Join Date
- Dec 2006
- Posts
- 447
I had to do this early on with my TM-1P. There is no top covering whatsoever on the TM enclosure and the moisture escaping out the top made a mess of everything within 10 feet of the machine. Mine are clear acrylic for lighting purposes and not nearly as neatly made as yours
Vern
Reply With QuoteSimilar Threads
-
Stainless Pick Guard
By mgman71 in forum Musical Instrument Design and ConstructionReplies: 4Last Post: 03-29-2011, 10:54 PM -
72 tele pick guard
By big_mak in forum Musical Instrument Design and ConstructionReplies: 5Last Post: 10-03-2010, 05:13 PM -
trigger guard
By turmite in forum Employment OpportunityReplies: 8Last Post: 04-22-2008, 03:13 AM -
Splash Guard for HF 8x12
By jk080 in forum Mini LatheReplies: 0Last Post: 01-13-2008, 02:01 AM -
Making a slash cut...
By Brass_Machine in forum Uncategorised CAD DiscussionReplies: 1Last Post: 12-04-2006, 03:24 PM
Posting Permissions
