Originally Posted by
Jerry888
In view of the problem from the stepper motor controller users usually encounter and the reports from the semiconductor ic markets, for example, noise come from the driving, reset zero function, board toast the board ect. We recently have lauched two powerful with high quality, market-focused ic products THB6128,THB7128 and THB8128, now are winning good reputation worldwide and have huge market.
THB6128
*1 channel PWM current control stepping motor driver
*BiCDMOS process IC
*Output on-resistance ( High side 0.3 Ω, Low side 0.25 Ω, Total 0.55 Ω; Ta = 25°C, Io = 2.0 A)
*2, 1-2, W1-2, 2W1-2, 4W1-2, 8W1-2, 16W1-2, 32W1-2 phase excitation are selectable
*Advance the excitation step with the only step signal input
*Available forward reverse control
*Iomax=2.2A
*Over current protection circuit
*Thermal shutdown circuit
*Input pull down resistance
*With reset pin and enable pin
*Operating temperature(Topg): -20 to 85 ° C
*Storage temperature(Tstg): -55 to +150 ° C
*Package: MFP30KR
*Dimentions: 1.52*0.79*0.025cm
*Weight: 0.6g
THB7128
*PWM current control stepping motor driver
*Output on-resistance (High side 0.3ohm, Low side 0.25ohm, Total 0.55ohm; Ta = 25℃, Io = 2.5A)
*VMmax=40V(DC),Iopmax=3.3A
*2, 1-2, W1-2, 2W1-2, 4W1-2, 8W1-2, 16W1-2, 32W1-2 phase excitation are selectable
*With built-in automatic half current maintenance energizing function
*Over current protection circuit
*Thermal shutdown circuit
*Input pull down resistance
*With reset pin and enable pin
*Operating temperature(Topg): -20 to 105 ° C
*Storage temperature (Tstg): -40 to +125 ° C
*Package: HZIP25
*Dimentions: 2.92*1.29*0.45cm
THB8128
*1 channel PWM current control stepping motor driver
*BiCDMOS process IC
*Output on-resistance( High side 0.25 Ω, Low side 0.15 Ω, Total 0.40 Ω; Ta = 25°C, Io = 4.0 A)
*Selectable phase drive (1/2, 1/8, 1/16,1/32, 1/64,1/128, 1/10,1/20step)
*Advance the excitation step with the only step signal input
*Available forward reverse control
*Iomax =4.3A
*Over current protection circuit
*Thermal shutdown circuit
*Input pull down resistance
*With reset pin and enable pin
*Operating temperature(Topg): -30 to 85 ° C
*Storage temperature (Tstg): -55 to +150 ° C
*Package: HZIP25
*Dimentions: 2.92*1.29*0.45cm
If you are interested in these chips,I can show you more information.
Please don't hesitate to contact me.