We have a DL20 twin spindle, On the left hand turret I can get the live tooling to turn but no axis movement, or the axis's will move but the live tool won't turn. This happens with a program or MDI, The right hand Turret works fine in either mode. Is there a parameter (Control is a MF-D6) that would cause this? It's making me pull my hair out.
Results 1 to 4 of 4
-
11-11-2011, 09:18 PM #1
Registered
- Join Date
- Apr 2007
- Posts
- 8
Mori DL20 twin Spindle Live tooling Problem
-
11-12-2011, 04:05 AM #2
Gold Member
- Join Date
- Aug 2011
- Posts
- 2517
did it work before and this problem just happened or has it never worked properly?
btw MF-D6 is Fanuc 16-series control.
-
11-14-2011, 03:23 PM #3
Registered
- Join Date
- Apr 2007
- Posts
- 8
It's a long drawn out story but we don't know. We are just now trying to get it to work. In either case I need somewhere to start looking.
-
11-15-2011, 04:00 PM #4
Registered
- Join Date
- Apr 2007
- Posts
- 8
bump
Reply With QuoteSimilar Threads
-
Small live tooling problem
By Jelle_b_k in forum G-Code ProgramingReplies: 8Last Post: 05-09-2011, 11:19 PM -
Need a post for a Mori NL2500 w/live tooling
By frogier in forum SurfcamReplies: 2Last Post: 12-11-2007, 07:24 PM -
Mori SL25M with live tooling?
By StingRay in forum Post Processors for MCReplies: 2Last Post: 09-08-2006, 10:44 PM
Posting Permissions
