Well I couldnt get anyone to get me the parameters I needed for our machine but we I went throught the book and the machine and got enough of them in too get rid of all the alarms except one! Someone please help me with this alarm: Tool number selection data setted abnormally check dgn (K6-B1, K6-B2) Anyone know which parameters set the tool selection data?
Thread: PUMA350B LOST PARAMETERS/ FOUND
Results 1 to 2 of 2
-
11-10-2011, 03:23 PM #1
Registered
- Join Date
- Jun 2009
- Posts
- 40
PUMA350B LOST PARAMETERS/ FOUND
-
11-13-2011, 09:49 PM #2
Registered
- Join Date
- Mar 2009
- Posts
- 377
Double check your Keep relays against the blue book,
specifically K6
or the G-data
SYSTEM -> PMC -> PMC PRM -> DATA -> G. DATA
There should be a procedure on changing G. DATA settings on one of your Fanuc manuals************************************************** *********
*~~Darwinian Man, though well-behaved, At best is only a monkey shaved!~~*
************************************************** *********
*__________If you feel inclined to pay for the support you receive__________*
*_______Please give to charity https://www.oxfam.org.au/get-involved/_______*
************************************************** *********
Reply With QuoteSimilar Threads
-
PUMA350B LOST PARAMETERS!
By ITT-Student in forum Daewoo/DoosanReplies: 0Last Post: 11-09-2011, 02:46 PM -
Lost parameters
By F_Alzaga in forum Want To Buy...Need help!Replies: 0Last Post: 11-03-2010, 01:32 AM -
M32 Lost Parameters
By speedrider in forum Mazak, Mitsubishi, MazatrolReplies: 4Last Post: 06-29-2009, 08:03 PM -
Lost parameters
By kangarabbit in forum FanucReplies: 3Last Post: 03-08-2009, 07:42 PM -
Lost parameters on 10T
By ktb100 in forum FanucReplies: 0Last Post: 03-29-2007, 06:38 PM
Posting Permissions
