Hi
I have started gathering up the part for a G0704 conversion. I ordered a C11 breakout board from Keiling. I also ordered a C22 interface and pendant. Does anyone know how this gets hooked up the mach 3 system. Does it get hooked up to the break out board? between the break out and the PC? I am finding the manuals for these CNC4PC very vague.
Brent
Thread: C22 pendant interface
Results 1 to 3 of 3
-
11-05-2011, 08:12 PM #1
Registered
- Join Date
- Oct 2008
- Posts
- 23
C22 pendant interface
-
11-05-2011, 10:34 PM #2
Registered
- Join Date
- Oct 2010
- Posts
- 266
well the manual says it comes with a brain file so go in mach under operator and go to brain control and load that file. then with it connected to a parallel port im guessing it should work.
-
11-08-2011, 01:52 PM #3
Registered
- Join Date
- Jul 2006
- Posts
- 887
if my memory serves me right, the pendant requires its own printer port.
I would have to take apart one of my smooth stepper controllers to verify this,
The brains have to be copied into mach 3 and once you have it working, some time needs to be spent calibrating it.
Reply With QuoteSimilar Threads
-
mpg pendant
By BAM in forum CNC Machine Related ElectronicsReplies: 1Last Post: 08-26-2008, 02:23 AM -
Dual Port Interface + Pendant/Handwheel
By Torchhead in forum News AnnouncementsReplies: 1Last Post: 09-12-2006, 12:10 AM -
MPG pendant
By troy676zsj in forum FadalReplies: 0Last Post: 07-31-2006, 03:15 AM -
Anyone using this pendant?
By trevorhinze in forum Mach MillReplies: 3Last Post: 09-10-2005, 01:45 PM -
Pendant?
By cncadmin in forum CNC (Mill / Lathe) Control Software (NC)Replies: 0Last Post: 05-07-2004, 03:10 PM
Posting Permissions
