Solidworks 2011 for the designing of the parts then generate the toolpaths in MasterCamX5? I ask because i wanted to ask i question for generating toolpaths in MasterCam X5 for a 3D part i have made in Solidworks 2011, if anyone is interesting in helping me.
Results 1 to 3 of 3
-
11-01-2011, 10:32 PM #1
Registered
- Join Date
- Jan 2008
- Posts
- 72
Anyone MasterCam X5 users here who use...
-
11-02-2011, 08:22 PM #2
Community Moderator
- Join Date
- Apr 2003
- Posts
- 3578
I have 2012 does that count? what is your question
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Cadcam
Software and hardware sales, contract Programming and Consultant , Cad-Cam Instructor .
-
11-02-2011, 10:10 PM #3
Registered
- Join Date
- Aug 2010
- Posts
- 101
I've upgraded to SW2012, but many of my parts are still in 2011 format. There's really very little difference in programming a model in X5 between 2010 or 2011, they both come in the same (and 2012 does if you have SW2012 installed on the same machine).
So what is it you need help with?
Reply With QuoteSimilar Threads
-
calling all Mastercam X5 Mitsubishi Wire Users
By new2kit in forum Post Processors for MCReplies: 7Last Post: 01-18-2021, 08:50 PM -
Mastercam users...........
By cnc Rookie in forum Bridgeport / Hardinge MillsReplies: 3Last Post: 02-29-2008, 08:03 AM -
Mastercam users...........
By cnc Rookie in forum Bridgeport / Hardinge MillsReplies: 0Last Post: 02-27-2008, 07:51 AM -
How Many C6 users out there
By JDsto in forum Syil ProductsReplies: 6Last Post: 01-02-2008, 05:39 PM -
2d & 2.5d Users
By rodneydeeeee in forum Dolphin CAD/CAMReplies: 0Last Post: 04-25-2007, 01:55 AM
Posting Permissions
