Hi everybody
I have the following problem:
I would like to mill 2 surfaces that are shifted by 90 ° onto a wave with a diameter of 19.3 mm.
From the front side, a part should remain with 4 mm from the wave. The machine is a Mori Seiki DL-151 with Fanuc MSC 501 controls without Y-axis.
Now, I want to mill the surface with a cutter, diameter of 16 mm. The mount on the turret is a driven tool for face processing. I already tried it with several programs, with the G-G12.1 and G3 commands. But unfortunately, the surface is not straight, but it is spheric. I need the program so that the surface is being milled in a straight way.
Somehow, the interaction between the X-axis and the C-axis is not correct.
Can someone help me out or explain where the error could be?
Thanks for your help
greetings
Murgtal