sending Drawing to Bevel300 CAD/CAM:
You can copy from floppy dxf OR save directly in folder and need to "rebuild" in "FILE MANAGER"
F25
99. mashine seropoint
1. you may set new seropiont

F24
V1... Depends on how much polishing wheel wear
V2... 20-> (glas 10mm) z-axis goes -5 to +5 "uses 20mm of tool"
V3... -2-> tool moves 2mm down before it starts machining...

F19 (may be edited in editor "/mp0" directory)
All parameters can be adjusted but needs list so you know what to change.