[Antonio Arguijo]

Good day,

I have a OKUMA SVP board damaged, version B (E4809-045-158-B)

I can't find this version board, only version C (E4809-045-158-C)

Someone knows if it is possible to use the version C instead B ?

[old timer okuma]

maybe... this "E" number is the pcb's number. the SVP board as an assembled set has an 1911 number on it as well. this number has 4 digits following it (example 1911-2161) followed by 2 more sets of numbers fore serial number. the first 4 digits after the 1911 number have to match.

[Antonio Arguijo]

Thanks alot for your help!!!

[Antonio Arguijo]

I've changed the SVP board, then appears the battery alalrm, I've, change the batteries, loaded all system backup's, but the battery alarm continues....
Do you have some idea what's happening?

[Superman]

Did you do a search at all

I used " battery alarm", this one may help

[Antonio Arguijo]

maybe... this "E" number is the pcb's number. the SVP board as an assembled set has an 1911 number on it as well. this number has 4 digits following it (example 1911-2161) followed by 2 more sets of numbers fore serial number. the first 4 digits after the 1911 number have to match.

Hello!

It's the same condition for a TFP board, original E4809-045-159-B, repalcement E4809-045-159-C ?

That numbers are 911-2140 in both boards...:drowning: