[casi]

Hello
I am new on these stuff what I am doing and I need help from you about stepper motor driver.
I want to bay stepper motor driver but I don't know which to bay.

this driver 4 Axis Stepper motor driver peak 8.2A, 16 micsteps CNC | eBay

or this Stepper motor driver DM860A, 24-80VDC, New arrival | eBay

which is the better and can you tell me do this driver for my stepper motor?

This is my stepper motor 4 Axis Nema 34 stepper motor with 878 oz.in &Driver CNC | eBay.

Sorry for my language.


Casi

[casi]

hello does anyone tell me

[casi]

Can you help me with it please

[Excelmachine]

Grretings to our friends in Kosova. You might want to ask in this section of the forums for advice: DIY-CNC Router Table Machines - CNCzone.com-The Largest Machinist Community on the net! . Someone there should be able to help you with your question.


Good luck.

[mike_Kilroy]

ok I'll reply: why are you asking what driver TO BUY?

your post showing what you hav INCLUDES the drives! and power supply!

You should not need ANYTHING else but mach 3 or equiv controller.

am I confused with what you already have?

[casi]

I just ask which is the better between these two DM860A or D2HB882MB for my stepper motor . My stepper motor are like this 34HST9805-37B2.

[Wombilly]

Hi, I am the senior service manager for EMACH CNC Machinery, Plasma, Routers, Engravers and Machining Centres
With our stepper systems I use the 806, they are so reliable and smooth, the torque output is great, as long as you set the steps ( dil switches ) to 20,000 then you can achieve decent speed, we use gearboxes also, which gives us a speed of 12 metres per minute upto 30m per min, depending on customer requirements.

[join95278]

Can you help me with it please

[join95278]

Can you help me with it please