587,485 active members*
3,581 visitors online*
Register for free
Login

Thread: Fanuc 21i-t error code

Results 1 to 3 of 3
  1. 08-18-2005, 06:01 AM #1
    dinoflex
    dinoflex is offline Registered
    Join Date
    Aug 2005
    Posts
    2

    Fanuc 21i-t error code

    I am running a Romi M20 and am getting an error code 3015. I am fairly new to using a CNC but have made a few projects and this is the first time this error code has come up. I have tried changing many figures around but come up with the same result. If anyone can help I would greatly appreciate it.
    Reply With Quote Reply With Quote
  2. 08-18-2005, 06:09 AM #2
    dinoflex
    dinoflex is offline Registered
    Join Date
    Aug 2005
    Posts
    2
    I forgot this if it helps at all. The manual recommends that I reduce the finishing, or use a tool with a smaller radius. I have tried both of these and still no luck.
    Reply With Quote Reply With Quote
  3. 08-18-2005, 10:01 PM #3
    gripper
    gripper is offline Registered
    Join Date
    Aug 2005
    Posts
    41
    Hi, have you changed the radius in the geometries, under the R column.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules