I have just bought some new Gecko G202's that will run a 270oz and 1200oz stepper. I now need to know what size pinion and rack that i need to buy. Like what angle/pitch, how many teeth etc.
Also where to buy from, I am in Australia. I do not mind buying from over-seas.
Cheers
Peter
Results 1 to 6 of 6
-
07-24-2005, 03:44 AM #1
Erfahrener Benutzer
- Join Date
- Feb 2004
- Posts
- 427
What rack and pinion for direct drive to use.
-
07-24-2005, 04:27 AM #2
Community Moderator
- Join Date
- Dec 2003
- Posts
- 24223
I believe Misumi will ship to Queensland out of Singapore, They have a huge free catalogue full of hardware. Although they do not appear to stock 14.5deg pressure angle rack. But 20deg is fine especially if the load is not really heavy. For a small table you could go with 20 diametral pitch with 12 at the largest.
Al.CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
-
07-24-2005, 05:37 AM #3
Erfahrener Benutzer
- Join Date
- Feb 2004
- Posts
- 427
do you know their website?
do u know their website?
-
07-24-2005, 03:45 PM #4
Community Moderator
- Join Date
- Dec 2003
- Posts
- 24223
This is their worldwide website http://www.misumi.co.jp/world/index.html
Here in N.A. Boston Gear is a very cost effective supplier but I suspect they may not be available in Australia.
Al.CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
-
08-10-2005, 11:29 AM #5
Registered
- Join Date
- Jun 2005
- Posts
- 1
try T.E.A. transmission. www.tea.net.au. They are just north of Brissy.
-
08-10-2005, 11:40 AM #6
Erfahrener Benutzer
- Join Date
- Feb 2004
- Posts
- 427
hazard,
I have orderd with them today.
Reply With Quote
Posting Permissions
