Hello,

I have been pondering using a high speed air spindle on my original Bridgeport Boss 8 R2E3 milling machine (just won one on eBay). The problem is that there is a spindle interlock that requires the spindle to be on or all axis feeds will be inhibited. The manual states that an emergency stop condition will be initiated if the spindle contactor drops out. I would like to mount the air spindle in a collet tool holder in the mill spindle, so obviously the mill spindle can't spin (at least if I want the air lines to stay connected). Has anyone ever used a secondary spindle on an old mill like this with the original controls?

Thanks in advance,

Joe