We are looking to fit chip conveyors to our 6030 machines. The jobs we are currently running are primarily aluminum. I am tired of flooding the floor and we need to have our machines running through the night to stay on schedule. Has anyone here ever attempted or accomplished this? If so, what company did you get your conveyors from? I have looked at the Jorgenson conveyors as I have used those in the past with good results. The Mayfran conveyors did not seem to be as robust. If you have any good info please post.
Thanks in advance.
Thread: Chip conveyor on 6030
Results 1 to 2 of 2
-
12-03-2010, 02:45 PM #1
Registered
- Join Date
- Sep 2006
- Posts
- 83
Chip conveyor on 6030
-
12-06-2010, 02:51 PM #2
Registered
- Join Date
- Apr 2005
- Posts
- 1194
Thats what I found out about the 6030 or 8030's that the coolant drains get plugged quite often. We have a 6 foot long brush for this.
We have had good luck with our Fadals milling mostly soft steel and aluminum up to 5 axis. We are always looking for spare parts
If you have a broken down Fadal give a shout.
Reply With QuoteSimilar Threads
-
Does anyone make a chip conveyor that works?
By bob1371 in forum DNC Problems and SolutionsReplies: 7Last Post: 04-03-2013, 04:53 PM -
Chip conveyor for LB15
By cad01 in forum OkumaReplies: 5Last Post: 12-10-2011, 05:11 AM -
4020 chip conveyor?
By MBX5 in forum FadalReplies: 4Last Post: 08-26-2010, 04:09 PM -
640t nexus chip conveyor
By Lost-one in forum Mazak, Mitsubishi, MazatrolReplies: 1Last Post: 03-11-2008, 05:27 PM -
Where to get chip conveyor belt material?
By SRT Mike in forum Uncategorised MetalWorking MachinesReplies: 5Last Post: 10-20-2006, 10:37 PM
Posting Permissions
