[master_bebe]

Hi
i received my X5+ couple of days ago with the pneumatic draw bar.
there's an R8 collet inside with a shank of 3/4".
i don't know how to get it out (or even if it's possible...), the release button on the back of the machine just opens it a bit so you can lock a 3/4" end mill inside (which is obviously too big...)
further more, i don't know what tools i can stick in there.
how do i fit an ER16 inside ?

thanks in advance, Guy.

[The Engine Guy]

Guy

This might give some ideas.

JLWCNC Quick Change Tool system CNC 16pc ER20 Seig x3 on eBay (end time 29-Nov-10 08:24:52 GMT)

I think what you have is designed for these kind of holders or maybe the Tormach type.

Regards
Rob

[Journey_Man]

I Hope All Is Well In IsRael! :wave:

Here is a link to Mari Tool...I have 4 of these Style Holders and Collets;
They are Excellent and have "0" runout.
ER16 3/4 STRAIGHT SHANK COLLET CHUCK TOOL HOLDER MariTool

Nice Mill You Have Too!

[PEU]

Guy

This might give some ideas.

JLWCNC Quick Change Tool system CNC 16pc ER20 Seig x3 on eBay (end time 29-Nov-10 08:24:52 GMT)

I think what you have is designed for these kind of holders or maybe the Tormach type.

Regards
Rob

Is this system fully compatible with Tormach TTS?

[master_bebe]

and yeah, everything is cool around here...

thanks again.