Hardinge VMC 600II, with Fanuc 18 0-MD control.
We just had a power "flicker" and now my machine control will only boot up to the date of manufature screen and has blinking (and beeping) alarm "NOT READY".
I have held down the LPQ and Cancel keys while powering up but that didn't help.
I noticed the Spindle Amplifier Module ( inside the main power cabinet ) will show 12 as soon as main power is switched on, then switch to 3 after a second or so, then switch to two flat blinking lights .
When I shut down the control (but still have main power turned on ) the Spindle Amplifier Module display switches to the number 24 and indicates an alarm.