Hi to everyone,

I've just bought two used PM DC motors for cheap,

The first one is a "PM FIELD SERVO MOTOR" from "EG&G TORQUE SYSTEMS" Model NO: MH-2120-003J code: 0283. It also has a sticker with three codes like this: ASM:
E.C:
E.I.R:
the codes were hand written.

The second motor is a "MOTRONICS Corporation" PT.NO. 801679-001 REV.G CAT.NO. 31107-14-210-05 INS. CL. H VOLT 24 DATE CODE 0183. It's a PM DC motor.

If you guys can help me with these:

1) On motor #1(EG&G servo) I have no idea of the voltage, Amp & torque ratings...it's a pretty fast motor, supplied it from 6V to 12V to 24V It's fast at 12V & Very fast at 24V (the bearings are old & whistle a bit)

2) On motor #2 (Motornics) I have no idea of the Amp & torque ratings.

Any info is welcome .

Thanks !
cnc2.
http://img405.imageshack.us/img405/2378/cimg4042y.jpg
http://img444.imageshack.us/img444/6...mg4043r.th.jpg
http://img137.imageshack.us/img137/5914/cimg4044.jpg
http://img137.imageshack.us/img137/2098/cimg4045.jpg
http://img152.imageshack.us/img152/549/cimg4046.jpg
http://img152.imageshack.us/img152/3741/cimg4047q.jpg
PS: I had troubles uploading the pics to the Zone, I had too many timeouts even when the file sizes were well below the limit, so, I used ImageShack.