I just have my 3-axis board from eBay () in hand. The chipset is TB6560. I will be using this board for my mini cnc router. Lowest current setting for this board is 1.5A (using dip switches).
Unfortunately my steppers are 1A and I have to set it in the board. The board shipped with 0.22 ohm registor (red-red-silver-gold), which you can see from the image. It has a DIP switch for current setting but I think I need to replace the registors for having lower current setting (1A).
Somebody having knowledge on this board please advice.
By the way, I also attached the config doc, which I received from the seller.
Thank you in advance.
Results 1 to 6 of 6
Threaded View
-
05-26-2010, 12:23 PM #1
Registered
- Join Date
- May 2010
- Posts
- 0
Current setting for TB6560 3-axis board (eBay)
Reply With QuoteSimilar Threads
-
need help with tb6560 board
By terryt in forum CNC Machine Related ElectronicsReplies: 97Last Post: 12-15-2012, 09:18 PM -
need help with 3 AXIS (TB6560) CNC DRIVER BOARD
By Jason Miller in forum CNC Machine Related ElectronicsReplies: 37Last Post: 08-11-2012, 03:34 AM -
eBay TB6560 Stepper Motor Driver Boards
By Mad Professor in forum Stepper Motors / DrivesReplies: 129Last Post: 07-03-2012, 04:38 PM -
TB6560 3-axis driver from ebay
By kish89 in forum Stepper Motors / DrivesReplies: 10Last Post: 07-01-2011, 01:10 AM -
ebay 3-axis TB6560 curiosity
By techguyav in forum DIY CNC Router Table MachinesReplies: 3Last Post: 10-24-2010, 10:28 AM
Posting Permissions
