Hi! I recently purchased a second hand Gildemeister CNC with Fanuc 0-TT controller. The controller language is set in Italian. I would really appreciate help on how to go about changing the language to English.
And if there is a link/url to find a manual for the controller online it would be really helpful (or if someone who has a soft copy could mail it to me I'd be immensely grateful).
Results 1 to 2 of 2
-
05-21-2010, 03:37 PM #1
Registered
- Join Date
- May 2010
- Posts
- 0
FANUC 0-TT Language conversion & Manual
-
05-22-2010, 09:13 AM #2
Registered
- Join Date
- Dec 2009
- Posts
- 955
hi
is simple
u have on optional prameters with 900 the parameter 924 that enables the italian language
go on parameter 904 BIT 3 and make 0 and will be default english.
GOOD LUCK!
Reply With QuoteSimilar Threads
-
FANUC oi-TC control panel language
By jalil in forum FanucReplies: 3Last Post: 09-28-2015, 11:33 AM -
change language of fanuc 6m
By mohammad reza in forum FanucReplies: 6Last Post: 11-09-2009, 03:18 PM -
Plain language conversion
By lazerracing in forum Bridgeport / Hardinge MillsReplies: 1Last Post: 05-06-2008, 09:58 AM -
Manual EDM to CNC conversion
By Jim Estes in forum Waterjet General TopicsReplies: 13Last Post: 03-15-2005, 02:06 PM
Posting Permissions
