I have this bridge saw with no controller. I have spare servo drives, motors and some stepper motors and drives.
Also I have AC Drives with gearbox motor. The AC Drive is Teco MA7200 with lot of features.
which I can use to drive the cutter head if possible. I think the gearbox was previous used with the saw.
I don't plan to use a computer to control this saw because is just one axis only forward and reverse direct.
What I like to have is the following:
1. Control the speed of the axis Forware and Reverse during cutting.
2. Jog to position with different speed.
3. Automatic home position when it hit the right limit switch.
What is the best solution for this requirement.
Results 1 to 13 of 13
Threaded View
-
05-05-2010, 04:18 AM #1
Registered
- Join Date
- Jul 2008
- Posts
- 68
Recommend Solution For Single Axis
Reply With QuoteSimilar Threads
-
Single axis motion without PC?
By marzetti in forum CNC Machine Related ElectronicsReplies: 9Last Post: 05-27-2013, 09:29 PM -
Simple Z axis solution for BP J Head retro
By DennisCNC in forum Bridgeport / Hardinge MillsReplies: 0Last Post: 07-24-2006, 04:41 AM -
4th axis solution to solve gantry skewing, geckos and servo, and axxus questions
By CuttersCov in forum CNC (Mill / Lathe) Control Software (NC)Replies: 1Last Post: 02-20-2006, 11:10 PM -
single axis controller
By robm7 in forum Stepper Motors / DrivesReplies: 4Last Post: 10-22-2005, 07:30 PM
Posting Permissions
