This screen set I have rewritten as I have found some problems testing it. Not retracting was one issues, calc problems etc......
Originally it was written by guy on video.
You must have blue screen installed, I also suggest having fixed plate in tool change location designated in M6start but not necessary.
I have fixed touch plate below face of my spoil board but have done testing and also runs fine if it is above it. I have found this set to do tool changing much easier.
[ame="http://www.youtube.com/watch?v=QoF99XwUQfc"]YouTube- A quick demo of a modified Mach Blue Tool Setter[/ame]
Note: this set is for inches as Native Units but can be very easy changed to mm
I have included in button scripts many descriptors to make it easier.
After unzipping drop .set file in c:/Mach3/
Happy testing, please let me know what do you think.......
Results 1 to 20 of 417
Threaded View
-
03-03-2010, 03:16 AM #1
Registered
- Join Date
- Jul 2009
- Posts
- 272
Mach 3 tool setter Big-tex version
Reply With QuoteSimilar Threads
-
Programming a tool setter to check tool height
By dbren in forum Mach MillReplies: 1Last Post: 03-04-2014, 01:08 AM -
Tool Length Offset Tool Setter
By CNCneeds in forum News AnnouncementsReplies: 0Last Post: 01-03-2014, 06:27 PM -
Tool Setter Macro for M-V60C and Metrol Setter
By mitshack in forum Mazak, Mitsubishi, MazatrolReplies: 1Last Post: 02-02-2013, 12:08 PM -
Okuma Tool Setter Reference Tool
By lisaclisac in forum OkumaReplies: 7Last Post: 09-28-2012, 03:21 PM -
Tool setter macro for M-V60C and Metrol setter
By mitshack in forum CNC (Mill / Lathe) Control Software (NC)Replies: 0Last Post: 10-06-2008, 02:38 PM
Tags for this Thread
Posting Permissions
