i had write my first G-code on CNC machine but when the program began in tool change the Head was rotated and the magazin start to rotat continuously without stop , i think first the problem in the tool memory.
but i need help for how i can solve this problem
Thread: Problem in Tool change
Results 1 to 3 of 3
-
11-06-2005, 11:04 PM #1
Registered
- Join Date
- Jul 2005
- Posts
- 20
Problem in Tool change
-
11-30-2006, 07:27 PM #2
Registered
- Join Date
- Nov 2006
- Posts
- 49
Most machines either have a limit switch to count the tool changer, or an encoder to track the position. Might have a bad switch or encoder.
-
02-14-2007, 04:02 AM #3
Registered
- Join Date
- Feb 2007
- Posts
- 6
Spinning tool head
I am not a seasoned veteran like most hear but I had a similar situation.
I manualy entered a tool change and the head kept spinning.
The maching was looking for a tool it could'nt find.
I believe I had entered:
T012012 when I it should have been T1212 for tool #12
For single digit tools it would be T0101 or T010101
I am working on an OKUMA 4va.
Hope this helped.
Reply With Quote
Posting Permissions
