Hello,
l'm having an issue with the settings of my Nowforever D100 series VFD connected to X6-1500 LPT machine. As most know who own this VFD, there is no associated manual and there are differences with the E100 manual that is widely available. All this said, I was hoping that someone who has this setup, and uses Mach3 to turn the Spindle on and off, if I could impose on you to provide the first thirty (30) program settings - P0-000-00 to 30 that is working on your machine. I tried the YouTube videos but these were made for a different Spindle. The X6-1500 uses a 1.5KW 400hz.
thanks
Roger