[nugent73]

I would like to first apologize in advance for my ignorance.
I am not the owner of this machine I am his Neighbor his computer buddy.
My friend bought a Laser Engraver/cutter ( I think that what it is, it is a huge coffin box). I do know it is from China
Any how it came with software on a disk.
Coreldraw12
Lasercut 5.3
It installs the Dongle Drivers and seems to install all software properly.

The issue I think he has and I am looking for confirmation and a possible fix is that he did not get the Dongle. The person he bought it from sent him these files

651541013.FMW
65153006.hdw

in a email and told him to put them on a USB thumdrive. Now my experience with a Dongle is that this cannot be done.
If it can be done does anyone know the process?

He needs the actual dongle correct?
If he cannot get it from the person he bought this machine from where can he get it?

Thanks in advance for any help you can provide me
Christopher Nugent
US Navy

[cinematic2]

You may buy original Dongle from Leetro.
Leetro Automation Co.,ltd.

[nugent73]

Thanks for the reply.
I looked through the link you placed below and I cannot find where they sell the Dongle?

[nugent73]

Hey all,
I have a link to the lasercut 5.3 software site listed below. I really need a link on where i can actually purchase the dongle. I have been googleing for hours and cannot seem to find the software or dongle for sale


Thank you

[cinematic2]

They do not sell Dongle alone.
They make MPC6515 and LaserCut software.
Just ask them.

[nugent73]

Thanks I sent them an email asking how to purchase new software and Dongle Thanks Again

[kewlkiwi]

Thanks I sent them an email asking how to purchase new software and Dongle Thanks Again

I've had a grand total of one email from Leetro.

It was from:

Zhao Jie
Leetro Automation Co., Ltd.
Tel: +86 28 85149190
Fax: +86 28 851877747


and the email address was:
[email protected]


This was in 2009, but the name and email URL may be of some use to you if it's still valid.


The two files sent by the seller, are to update the firmware of the laser and they are indeed put on a USB stick which is then plugged into the laser within (IIRC) 10secs or so of powerup.


But if you are going to upgrade, you'll be better to wait for the latest version of them to come with your upgrade kit.


And yes, you do need a dongle to run Lasercut, and the seller should have supplied it with the machine. (It plugs into the computer of course, not the laser, so perhaps he just forgot to take it out) (chair)

[automationtechinc]

I've had a grand total of one email from Leetro.

It was from:

Zhao Jie
Leetro Automation Co., Ltd.
Tel: +86 28 85149190
Fax: +86 28 851877747


and the email address was:
[email protected]


This was in 2009, but the name and email URL may be of some use to you if it's still valid.


The two files sent by the seller, are to update the firmware of the laser and they are indeed put on a USB stick which is then plugged into the laser within (IIRC) 10secs or so of powerup.


But if you are going to upgrade, you'll be better to wait for the latest version of them to come with your upgrade kit.


And yes, you do need a dongle to run Lasercut, and the seller should have supplied it with the machine. (It plugs into the computer of course, not the laser, so perhaps he just forgot to take it out) (chair)

Hi Everyone

I had a very bad experience with Leetro
I bought 100pcs of stepper motor driver from them. There are 20 pcs of bad drivers. My office contacted them many times. No answers yet. They do not have good service after sales. Becareful !!!!

[balsa burner]

The last price quote i got from leetro a few days ago lists the dongle and laser cut software at 242 usd.
I don't know if you can buy it on it's own, i have to say they are not the easiest company to deal with.

I have been trying to get some tech support from them but it just ain't happening coz i bought the controller from one of there dealers and not them. When i asked if i could have a price for a replacement it's nearly three time the price i have been buying them for, oh yeah they want to charge a 20usd fee for selling it to me !

Anybody know how to jtag or factory reset a mpc6535 ?
or where to get a mpc 03 ?

[a.vafaee]

Anybody know how to jtag or factory reset a mpc6535 ?

[G.Weike-Abby]

Hi,

Where did you buy it ?
Abby
G.WeikeLaser Factory

Anybody know how to jtag or factory reset a mpc6535 ?

[gweikelaser]

Hi Sir.
You mean to make software recover its original seeting ? if so ,just reinstall laser software will be ok,is this to your question?

Any others ask us freely

Best Regards
Lucy Lee
G.WEIKE LASER
[email protected]

Anybody know how to jtag or factory reset a mpc6535 ?

[elpete0068]

im gonna have a control board/dongle/software available in about a month or so - gonna convert a laser over to G-code - if you might be interested

[frank wang]

HI,

if you still need the mpc6515 control system , i can provide ,385$/set . Paypal or TT or buy from my ebay store or aliexpress store .

in my opinion , i do not advice choosing the leetro control system , first the price is high and also it is hard to find a replacement when some of the parts break down .

I also have RD320 ,Awc608 ,and AWC608C laser control system . good price .
all the parts about laser machine . i can provide .

We also can talk about the questions during using .

Waiting for your reply .

Email : [email protected] ,Skype: cenranlaser

[frank wang]

The last price quote i got from leetro a few days ago lists the dongle and laser cut software at 242 usd.
I don't know if you can buy it on it's own, i have to say they are not the easiest company to deal with.

I have been trying to get some tech support from them but it just ain't happening coz i bought the controller from one of there dealers and not them. When i asked if i could have a price for a replacement it's nearly three time the price i have been buying them for, oh yeah they want to charge a 20usd fee for selling it to me !

Anybody know how to jtag or factory reset a mpc6535 ?
or where to get a mpc 03 ?

HI , Sir

The mpc 03 has stopped production .

You need think to chance a system.

Email :[email protected] .SKYPE: cenranlaser