Hi All, First post here, I'm going to be retrofitting a HF X-3 mill, and was going to order a stand from Grizzly, as HF dosen't sell one. I was wondering if the Grizzly stand would be too short with the X-3 mill, as they were meant for larger mills. What other stands are on the market? I see that SYIL has a nice stand, but I don't think it's available without buying the whole package... What is everyone else using?
Thanks; John
Thread: X-3 Stands
Results 1 to 4 of 4
-
09-28-2007, 11:15 PM #1
Registered
- Join Date
- Sep 2007
- Posts
- 6
X-3 Stands
-
09-29-2007, 04:51 AM #2
Gold Member
- Join Date
- Sep 2006
- Posts
- 203
You can buy the stand by itself from us.
Direction, Commitment, Follow Through
-
09-29-2007, 11:25 AM #3
Registered
- Join Date
- Aug 2005
- Posts
- 132
Hi,
For our X3 I used the HM-45 Mill stand, which would be the same as you grizzly stand. But I mounted ours sideways.
I'm 6'4" and I don't find it too low. It's great for catching the coolant being side ways too.
Rod
-
09-29-2007, 06:21 PM #4
Registered
- Join Date
- Sep 2007
- Posts
- 6
Syil, I went to your site, and didn't see the stand listed.... How much is it?
Rod, Thank You, I thought that the lip on the Grizzly stand might be good for catching the coolant, and now that you think it's not too short, I'll see what the Syil stand costs and go from there... John
Reply With Quote
Posting Permissions
