[partsman]

What is the VF-0? I see a lot of VF-0E machines listed for sale which have the same specs as the VF-2. I found one post where someone said they are lighter duty versions of the VF-2 intended for schools or something- not intended for production work? I'm sure there is someone here that knows the real story. Are they good machines or should I keep looking for a VF-1 or 2?

[KenFoulks]

VF-0E is an extended table VF-0. The VF-0E did not have the Vector Drive spindle motor..which means less spindle torque. Because of this, the VF-0E is a little bit lighter duty than the VF-2. Of course, you can find plenty of them being used today in production.

[KenFoulks]

Here are some helpful links:

Model Differences:
http://www.cnczone.com/forums/haas_m...vs_vf-2_a.html


Production Examples:
http://atyourservice.haascnc.com/pdf/v3i08.pdf

CNC Milling » Antron Engineering by Antron Engineering

TPI Manufacturing & Design Equipment List

[partsman]

Perfect! That answers my question- thanks! I tried searching pretty much all day but I guess I missed that one.

[partsman]

One more question Ken... By 'lighter duty' were you referring to the structure & rigidity of the machine or just the power on tap from the spindle?

[gizmo_454]

By the way he worded it, I am sure he meant spindle power.

Mike

[Machineit]

Yes, only spindle. The rest of the machine is physically the same. No change of castings etc.

[partsman]

Thanks again!