I'm looking for diagrams for wiring a CNC controller board. I need information on the IC's used as well, and it would be helpfull to have some explanation of the wiring diagram.
I don't want to buy a ready made board as I am doing this as a hobby; I want to understand the axis controllers so I can modify/add in the future to them. I also may want to code custom software for it too.
I got basic electronics knowledge too.
Thread: CNC controller
Results 1 to 3 of 3
Hybrid View
-
01-24-2004, 09:32 PM #1
Registered
- Join Date
- Nov 2003
- Posts
- 452
CNC controller
-
01-24-2004, 11:35 PM #2
Community Moderator
- Join Date
- Dec 2003
- Posts
- 24220
Are you designing with servo's or steppers in mind?
Al
-
03-23-2004, 08:32 PM #3
Registered
- Join Date
- Jan 2004
- Posts
- 71
Try this, 3amps and up to 55volts. The nice thing is it is a microstepping chopper driver board. Software is open source and the design works great. Very smooth at 8 microsteps.
http://www.embeddedtronics.com/microstep.html
Kin Fong
http://www.embeddedtronics.comhttp://www.embeddedtronics.com/
Robotics, CNC, and Controllers
Reply With Quote
Similar Threads
-
CNC controller
By osdhillon in forum CNC (Mill / Lathe) Control Software (NC)Replies: 8Last Post: 11-07-2007, 05:13 AM -
Open Source CNC Controller Specification
By gregmary in forum DIY CNC Router Table MachinesReplies: 28Last Post: 12-05-2005, 04:58 AM -
Need help selecting CNC controller
By pab in forum CNC (Mill / Lathe) Control Software (NC)Replies: 7Last Post: 02-03-2005, 02:21 PM -
3D or 2D MAXI Style Hobby CNC PWM Controller!
By icm in forum News AnnouncementsReplies: 1Last Post: 01-05-2005, 03:36 PM
Posting Permissions
