[CATCH22]

Ive been trying to open a dxf file in mastercam 9.1 and all i seem to get is a blank screen.Im going to file,converters,autodesk,read file but it doesnt open for me.Does anyone know if there is some setting that I have to have set that I might be missing? Thanks Mike

[Steve Arteman]

DFX will not bring in 3-d entities if I remember right. Here from help file"Select Blank "Paper Space" entities if you want Mastercam to blank out "Paper Space" entities when converting AutoCAD files. "Paper Space" is an AutoCAD function often used for notes, drafting entities, etc. around the geometry. By selecting this option, Mastercam will not bring those entities into the converted file."
Steve
www.cad2cam.blogspot.com

[Mitsui Seiki]

I have the same problem.All I get is a green square.

[JROM]

.dfx will only support 2D geo.
no solids, no surfaces
just points, lines, and arcs on a flat plane in x,y

[ger21]

.dfx will only support 2D geo.
no solids, no surfaces
just points, lines, and arcs on a flat plane in x,y

Maybe in MasterCAM, but .dxf files can contain solids and any other entities (except nurbs surfaces) in 3D space, not just flat.

[Steve Arteman]

Ger,
In Mastrcam (dfx will only support 2D geo.
no solids, no surfaces
just points, lines, and arcs on a flat plane in x,y)
This is what we meant
Steve
__________________

[cadcam]

But Ger21 is correct it now supports and for about 5 years or more. it also support Solids and 3d wire support.

Catch22 can you share the file you are having trouble with along with some info.
Info= What Cad systems was it made in and What version of that software?

[Steve Arteman]

Sorry, I should of said Mastrcam 9.1mr0105(dfx will only support 2D geo.
no solids, no surfaces
just points, lines, and arcs on a flat plane in x,y) January of 05 was the first maintenance release for mastercam and the last release of 9.1 and as far as I know 9.1 DXF never supported anything but 2-d geometry.
Steve
www.cad2cam.net

[cadcam]

Steve, sorry to say I was getting them in V8 with company I was contracting with.They were making them in Autocad and giving them to me.

[Steve Arteman]

I just tried DXF in 9.1mr0105 no 3-d wireframe or solids just 2d xy plane, DWG yes works fine.

[Mike Mattera]

V9 will read surfaces and 3D wire from a DWG file and also from an SAT. The SAT conversion actually made DWG's of each solid model contained in the SAT.

Mike Mattera