Hi guys, noobie on here i wondered if anyone could help me. Im trying to cut 3mm white acrylic on a 400w multicam laser, my problem is im getting burn marks on internal rads. I would normally clean these off but i have a big order to cut! Any help or tips would be brilliant!
Craig
Results 1 to 3 of 3
-
10-27-2009, 10:16 AM #1
Registered
- Join Date
- Oct 2009
- Posts
- 1
Hi and help needed cutting white acrylic!
-
10-27-2009, 12:06 PM #2
Registered
- Join Date
- Jul 2008
- Posts
- 776
Hello,
Please send pictures of problem. Do you use cutting table? If yes - how it looks? Do you have air assist with air compressor or you can add CO2 to burn area?
-
03-01-2010, 02:28 AM #3
Registered
- Join Date
- Mar 2010
- Posts
- 0
A low pressure oxy assist gas should help clear it up no problem, hope thats an option for you. Clear perspex comes out clear on the cut edge with the right setting and oxy assist
Reply With QuoteSimilar Threads
-
Acrylic cutting machining
By john petre in forum News AnnouncementsReplies: 0Last Post: 09-22-2009, 05:39 PM -
Cutting black acrylic
By stephaniehamer in forum Glass, Plastic and StoneReplies: 0Last Post: 08-02-2009, 05:52 PM -
Newbie needs help! cutting acrylic, and double cutting? 3040 machine
By stephaniehamer in forum Laser Engraving / Cutting Machine General TopicsReplies: 5Last Post: 06-29-2009, 09:37 PM -
Cutting Acrylic
By Gujustud in forum Glass, Plastic and StoneReplies: 20Last Post: 01-28-2009, 02:05 AM
Posting Permissions
