Hello. I need a syntec pp for aspire if you could send it to me. Thank you.
I’m getting a Macro 333 error. Can you help solve this please.
Hello Lee, have the more basic of these options, what software do you use and what post processor did you use?
hello can anyone help me? i bought a cnc router with syntec FC-60CA controller. the software i think is the same as the 6MB controller. the problem is that the spindle speed control is not done. just the spindle start. fix rpm. are there two more free outputs on the controller that could solve the 10v speed control?
"Any questions I might be able to help with on the Syntec 6MA perhaps I we can share or if anyone has any tips or tricks I'm always keen to learn"
Hi Lee, I hope this offer still stands after seven years :-)
I just purchased a used 2017 3 spindle machine with a 6MA control. I'm catching on to the process (while learning V Carve at the same time) but there's two issues I can't get around.
1) I'm told the TTO does not work for some unknown reason which may relate to issue 2
2) I can set Z for T1 using Offsest>workpiece>latch process and T1 works fine. But the instructions say to use Tool Wear Set >Tool Length to reference and set T2 and T3 to ZAb0. However, Z Ab never changes to 0. It remains the value I gave the respective T length.
Do you have any experience with an issue like this or can you direct me to someone who might?
Cheers